Menu
Menu
| Model Specification | D-30A | D-30B | ||
|---|---|---|---|---|
| CH1 | CH2 | CH1 | CH2 | |
| DC output voltage | 5V | 12V | 5V | 24V |
| Output voltage range(Note:2) | ±2% | ±3，-7% | ±2% | ±3，-5% |
| Rated output current | 4A | 1A | 2.2A | 1A |
| Output current range(Note:2) | 0.5-4A | 0.1-1A | 0.5-4A | 0.1-1A |
| Wave and noise(Note:3) | 50mVp-p | 100mVp-p | 50mVp-p | 100mVp-p |
| Inlet stability(Note:4) | ±0.5% | ±1% | ±0.5% | ±1% |
| Load stability(Note:5) | ±0.5% | ±4% | ±0.5% | ±4% |
| DC Output power | 32W | 35W | ||
| Efficiency | 72% | 74% | ||
| Adjustable range for DC voltage | CH1; +10, -5% | CH1; +10, -5% | ||
| AC input voltage range | 85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC | |||
| Input current | 0.8A/115V 0.45A/230V | |||
| AC Inrush current | Cole-start current 18A/115V 36A/230V | |||
| Leakage current | ＜0.5mA/240VAC | |||
| Overload protection | 105%~150% Type: Cut off output Reset: auto recovery | |||
| Over-voltage protection | …………………… | |||
| High-temperature protection | …………………… | |||
| Temperature coefficient | ±0.03%/℃（0~50℃） | |||
| Setup,rise,hold up time | 200ms, 50ms, 30ms | |||
| Vibration | 10~500Hz, 2G 10min,/1cycle, period for 60min, Each axes | |||
| Withstand voltage | Input and output internal: 1.5KvAC, Input and enclosure: 1.5KvAC, Output and enclosure: 0.5KvAC |
|||
| Isolation resistance | Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ |
|||
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve），20%~90%RH | |||
| Stoerall dimension | -20℃~+85℃,10%~95%RH | |||
| Overall dimension | 129×98×38mm | |||
| weight | 0.4Kgs | |||
| safety standards | Meet UL 1012 requirement (Not apply for the mark) | |||
| EMC standards | Meet FCC PART15 J Conduction class A | |||
