DC output voltage:-5V
Rated output current:1A
DC Output power:122.5W
Model Specification | Q-100B | Q-100D | ||||||
---|---|---|---|---|---|---|---|---|
CH1 | CH2 | CH3 | CH4 | CH1 | CH2 | CH3 | CH4 | |
DC output voltage | 5V | 12V | -5V | -12V | 5V | 12V | 24V | -12V |
Output voltage range(Note:2) | ±2% | ±6% | ±6% | ±6% | ±2% | ±8% | ±10% | ±10% |
Rated output current | 13A | 2A | 1A | 1A | 8A | 1A | 2A | 0.5A |
Output current range(Note:2) | 3-13A | 0.2-2A | 0.1-1A | 0.1-1A | 2-12A | 0.1-1A | 0.2-2A | 0.1-1A |
Wave and noise(Note:3) | 80mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 100mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note:4) | ±0.5% | ±1% | ±1% | ±1% | ±0.5% | ±1% | ±1% | ±1% |
Load stability(Note:5) | ±0.5% | ±5% | ±5% | ±5% | ±0.5% | ±7% | ±8% | ±8% |
DC Output power | 106W | 106W | ||||||
Efficiency | 76% | 76% | ||||||
Adjustable range for DC voltage | CH1; +10, -5% | CH1; +10, -5% | ||||||
AC input voltage range | 88~132VAC/176~264VAC selected by switch 47~63Hz; 248~370VDC | |||||||
Input current | 3A/115V 1.5A/230V | |||||||
AC Inrush current | Cole-start current 30A/115V 60A/230V | |||||||
Leakage current | <1mA/240VAC | |||||||
Overload protection | 105%~150% Type: Cut off output Reset: auto recovery | |||||||
Over-voltage protection | CH1: 5.75~6.75V | |||||||
High-temperature protection | …………………… | |||||||
Temperature coefficient | ±0.03%/℃(0~50℃)ON+5V | |||||||
Setup,rise,hold up time | 200ms, 50ms, 16ms | |||||||
Vibration | 10~500Hz, 2G 10min,/1cycle, period for 60min, Each axes | |||||||
Withstand voltage | Input and output internal: 1.5KvAC, Input and enclosure: 1.5KvAC, Output and enclosure: 0.5KvAC |
|||||||
Isolation resistance | Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ |
|||||||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||||||
Stoerall dimension | -20℃~+85℃,10%~95%RH | |||||||
Overall dimension | 199×110×50mm | |||||||
weight | 0.85Kgs | |||||||
safety standards | Meet UL 1012 requirement (Not apply for the mark) | |||||||
EMC standards | Meet FCC PART15 J Conduction class B |