DC output voltage:12V
Rated output current:2.1A
DC Output power:25.2W
Model Specification | S-25-5 | S-25-12 | S-25-15 | S-25-24 |
---|---|---|---|---|
DC output voltage | 5V | 12V | 15V | 24V |
Output voltage range(Note:2) | ±2% | ±1% | ±1% | ±1% |
Rated output current | 5A | 2.1A | 1.7A | 1.1A |
Output current range(Note:2) | 0-5A | 0-2.1A | 0-1.7A | 0-1.1A |
Wave and noise(Note:3) | 50mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stability(Note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
DC Output power | 25W | 25.2W | 25.5W | 26.4W |
Efficiency | 65% | 76% | 77% | 80% |
Adjustable range for DC voltage | +10, -5% | ±10% | ±10% | ±10% |
AC input voltage range | 85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC | |||
Input current | 0.6A/115V 0.35A/230V | |||
AC Inrush current | Cole-start current 15A/115V 30A/230V | |||
Leakage current | <0.75mA/240VAC | |||
Overload protection | 105%~150% Type: Cut off output Reset: auto recovery | |||
Over-voltage protection | …………………… | |||
High-temperature protection | …………………… | |||
Temperature coefficient | ±0.03%/℃(0~50℃) | |||
Setup,rise,hold up time | 200ms, 100ms, 30ms | |||
Vibration | 10~500Hz, 2G 10min,/1cycle, period for 60min, Each axes | |||
Withstand voltage | Input and output internal: 1.5KvAC, Input and enclosure: 1.5KvAC, Output and enclosure: 0.5KvAC |
|||
Isolation resistance | Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ |
|||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||
Stoerall dimension | -20℃~+85℃,10%~95%RH | |||
Overall dimension | 99×97×35mm | |||
weight | 0.37Kgs | |||
safety standards | Ul1012 TUV EN6050(IEC650, UL1950)Approved | |||
EMC standards | CISPR22(EN55022), IEC801-2,3,4,IEC555-2 Verification |